Let's talk about something critical for all Corvallis drivers: your brakes. Your vehicle is heavy, and it takes a lot of muscle to bring it and your passengers to a safe stop – so everything needs to be in good working order.
Here's an explanation on how your disc brakes work:
The wheel hub keeps your wheel attached to your vehicle. The brake disc – or rotor – is attached to the hub and rotates with the wheel as you drive around Corvallis. Your brake pads clamp onto the rotor to slow the wheel.
The brake caliper straddles the rotor and squeezes the rotor to slow it down. The calipers contain brake pads which press on the rotor when you put your foot on the brake. The brake piston causes the calipers to squeeze and release as you use your vehicle brakes.
Your brake pads start to wear the first time you step on the brakes. Eventually the pads wear out and need to be replaced. If you don't replace the pads when they're worn out, the metal parts of the brake will grind against the rotor and carve grooves into the surface. We've all heard grinding brakes and it's not a pretty sound.
If a rotor isn't scored significantly, your friendly and knowledgeable Clayton's Auto Service technician can put it on a lathe and smooth it out. If the grooves are too deep or if the rotor is warped or cracked, you need to replace it.
Sometimes brake pistons can stick and must be replaced. Typically it's cheaper to replace the entire caliper at Clayton's Auto Service in Corvallis than to rebuild the piston.
So there you have it – an important lesson on how your disc brakes work. If you replace brake pads on time, it will not only keep your vehicle stopping safely but could save you cash on unnecessary repairs down the road.
The brake rotor, or disc, is attached to your wheel. The brake pads rub on the rotor to slow your car when you are driving in Corvallis.
Rotors can warp, crack or become misaligned. They can also be damaged by worn out brake pads that scratch grooves into the surface. These conditions result in less contact surface for the brake pads, leaving you with reduced braking power.
Over time and miles, rotors can also wear down below safe specifications. It is important for Corvallis drivers to know that simply replacing brake pads on a wheel with a bad rotor will not solve the problem. Depending on their condition, rotors may be resurfaced or replaced.
Brake noise or a pulsation in the brake pedal are signs of potential brake problems that should be addressed right away. If you have any brake concerns, please have your friendly and professional Clayton's Auto Service tech perform a thorough inspection.
When it comes to preventive maintenance and vehicle care, most Corvallis drivers know how important it is to check their brakes. But brakes are more than just brake pads and shoes. There are a lot of components in the brake system, and they all need to be in good working order.
The pads and shoes are known as the friction materials in the brake system. They push together, providing friction which stops the vehicle. It's no wonder they have to be checked regularly for wear, and brake pads and shoes need to be replaced periodically.
Brake pads/shoes gradually wear out, but that doesn't mean your braking gradually becomes less effective. The pads are engineered so that they maintain good braking until they wear too thin to provide adequate friction. At this point, they need to be replaced.
But your braking system also has mechanical parts. These pistons and springs can also gradually wear out or get gummed up by oil, dirt and other road spatter. A brake inspection at Clayton's Auto Service in Corvallis includes a check of these parts as well as the pads and shoes. Your friendly and knowledgeable pros at Clayton's Auto Service can then advise you of any parts that need cleaning or replacement.
The fluid component to the brake system needs a regular check-up at Clayton's Auto Service as well. The brake fluid cools and protects your brake system. Protective additives are gradually depleted by the operation of the brake system, and moisture buildup inside the fluid can diminish its effectiveness. When you have your brakes serviced at Clayton's Auto Service in Corvallis, the fluid should be checked and, if needed, replaced, which will clean out water, debris and dirt.
It is important to remember that your brake system also includes your tires. No matter how well your brake system is performing, if your vehicle tires are worn, you won't get good stopping power. Traction is the power of your tires gripping to the roadway. Traction is always better on tires with a good tread. Good traction translates to good braking.
This is particularly important on wet Corvallis roads. A good tire will give you good braking on either wet or dry Oregon roads. But stopping distance increases dramatically when worn tires meet wet roads. Tread on a tire acts to channel away water as the vehicle passes over the wet road, improving contact between the tire's surface and the road; that maintains traction. But the thinner the tread, the less effective the water channels become, and water can get between the tire and the roadway, reducing friction. A loss of friction means a longer stopping distance and possibly the loss of control.
Braking depends on two things: the weight of your vehicle and the speed of the vehicle. The heavier the vehicle or the faster the vehicle, the more braking power it requires. Thus, brake systems vary from vehicle to vehicle. For example, a pickup that is designed for heavy loads has a more powerful braking system than a compact car. Sports cars also have higher-grade braking systems than minivans.
Regardless of what kind of car you drive in Corvallis, it is always good auto advice to keep your brake system in good repair, and that means ALL of your brake system. Just one more way to keep your travels accident- and worry-free.
Richard Petty once told AutoNetTV, “You've gotta have good brakes. If you've got good brakes you can keep yourself out of a lotta trouble.”
That's why a regular brake inspection is on every Corvallis driver's maintenance schedule. An inspection by your service advisor at Clayton's Auto Service will check your brake system and let you know if there are any problems.
Of course, if you're having trouble with your brakes, get your car into Clayton's Auto Service in Corvallis right away. Here are some symptoms for Corvallis drivers to watch for:
Low or spongy brake pedal
Hard brake pedal
A brake warning light that stays on
Constantly squealing or grinding brakes
Vibrations or clunking sounds when you apply your brakes
If you are experiencing any of these, it's time to get your brakes checked. Talk to your friendly and knowledgeable service advisor at Clayton's Auto Service .
There are two types of brakes: disc and drum. Disc brakes have a rotor that's attached to the axle. Calipers straddle the rotor, kind of like the brakes on a bicycle.
Drum brakes are most common on back wheels. Both types have pads or shoes that press against the brakes and slow the vehicle. Brake pads and shoes are made out of very tough material to withstand the heat and force generated when stopping your vehicle. Eventually, they wear out with use and become too thin and need to be replaced at Clayton's Auto Service.
If the brake pads wear away completely, you can damage the rotors. The calipers can grind grooves in the rotor. Then the rotor must either be resurfaced or replaced. That's not only expensive but also dangerous because your vehicle won't stop as quickly. Sometimes rotors warp or crack and must be replaced.
A brake service at Clayton's Auto Service will also include a check of your brake fluid. When the brakes are applied, the pressure in the fluid activates the brake pads or shoes. Not enough fluid means not enough pressure to brake properly. Also, water builds up in the brake fluid over time, which leads to corrosion, leaks and brake damage, and with hard use, the brakes could severely fade or even fail. Corvallis drivers should change the brake fluid when their vehicle manufacturer recommends to avoid these problems.
Come in to Clayton's Auto Service for an brake inspection before damage occurs. You can call ahead for an appointment by calling 541-752-2263.
Safety should always be an element of your vehicle care. So even if you don't care about how your vehicle looks, you should practice preventive maintenance to protect yourself — and other Corvallis drivers — on the road. And good safety starts with good brakes.
Brakes need a regular inspection. There are parts that wear out or wear down, and it's best to replace them before you have serious problems.
Of course, if you are having trouble with your brakes, NOW is the time to fix them. If your brake warning light is on, that's a good sign that you need your brakes checked. You can also tell something is wrong with your brakes by the feel of the pedal or unusual sounds while braking. If the brake pedal is low, feels spongy when you press it or is hard to push, that indicates a problem with your brakes. If you hear squealing, grinding or clunking noises when you brake, that can also indicate serious problems. If vibrations accompany braking, then it is to get your brakes checked.
Brakes come in two basic types. With disc brakes, a rotor is attached to the axle of the vehicle. Padded calipers straddle the rotor and close when the brakes are applied. The resulting friction causes the rotor — and the axle — to stop turning. With drum brakes, brake pads (also called shoes) press against the inside of a drum to create friction and stop the drum, and hence the vehicle's wheels, from turning.
When Clayton's Auto Service services your brake system, your friendly and knowledgeable service advisor checks all of the brake pads for wear. If they are too thin, they need to be replaced. This is an inexpensive repair at Clayton's Auto Service compared to what procrastination will cost you. If pads wear away completely, then the rotors and drums can be damaged. They will have to be either resurfaced or replaced, and that can be expensive. But if your vehicle brake pads are worn out, then your brakes are compromised and your stopping power is greatly reduced. You could easily wind up in an accident.
Brake pads come in several different grades such as regular, metallic and ceramic. The higher grades are more expensive, but they also work better. Oregon drivers who want better and smoother braking should consider upgrading. However, Corvallis drivers should NEVER use a brake pad that is lower than their vehicle manufacturer's recommendation.
After your brake pads are checked at Clayton's Auto Service, it's also wise to have your brake fluid checked. This is a critical element in your brake system. When you press your brake pedal, you are compressing the brake fluid, creating pressure that activates the brake pads. If your fluid pressure is low, it will decrease your braking power. The pads just won't be able to press hard enough against the rotor or drum to stop your vehicle. Just as with worn pads, insufficient brake fluid can lead to an accident in Corvallis.
Water can build up in your brake fluid, which can cause corrosion in your braking system. Eventually this can cause your brake fluid to leak. So Corvallis drivers should also change their brake fluid periodically. Your vehicle owner's manual will have guidelines on how often it should be replaced, or you can ask a service advisor at Clayton's Auto Service.
Remember, Corvallis folks, safety first. It's auto advice for all Corvallis drivers on the road. You're not just protecting others; you're protecting yourself.